346 CHAPTER 12 RDI
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
ing the OK button.
3. The J-Link RDI license is now added.
12.4.4.2 Init tab
Macro file
A macro file can be specified to load custom settings to configure J-Link RDI with
advanced commands for special chips or operations. For example, a macro file can be
used to initialize a target to use the PLL before the target application is downloaded,
in order to speed up the download.
To Next Page
Loading...
