350 CHAPTER 12 RDI
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
12.4.4.5 Breakpoints tab
Use software breakpoints
This allows to set an unlimited number of breakpoints if the program is located in
RAM by setting and resetting breakpoints according to program code.
Use flash breakpoints
This allows to set an unlimited number of breakpoints if the program is located either
in RAM or in flash by setting and resetting breakpoints according to program code.
An info window can be displayed while flash breakpoints are used showing the cur-
rent operation. Depending on your JTAG speed the info window may hardly to be
seen.
To Next Page
Loading...
