SICK microScan3 Core I/O

Display Reference Contour Field
Y
ou determine whether the reference contour field is displayed.
Drawing area
You can use a Cartesian or a polar coordinates system and select the colors for the grid
and the drawing area.
b
Choose the option Cartesian.
✓
The coordinates system is shown as a Cartesian coordinates system.
b
Choose the option Polar.
✓
The coordinates system is shown as a polar coordinates system.
b
Select Color of grid.
✓
The field editor’s grid is displayed in the chosen color.
b
Select Color of drawing area.
✓
The field editor’s drawing area is displayed in the chosen color.
8.9.6 Editing fields using coordinates
You can use coordinates to edit fields. Depending on the form on which a field is
ba
sed, the appropriate input fields are displayed. The example shows a dialog box for a
rectangle.
CONFIGURATION 8
8025870/2020-09-04 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O
97
Subject to change without notice