14 Technical data
14.1 Variant overview
Ordering information: see "Or
dering information", page 7.
Table 23: Devices and type codes
Performance package
Int
egration in the control
Protective field
range
Device without system
plug
System plug Device with system plug
•
C
ore
•
I/O
≤ 5.5 m MICS3-AAAZ55AZ3 MICSX-ABIZZZZZ3 LS-MS3-CO-IO-5M
14.2 Version numbers and functional scope
Functional scope
Older de
vices might not support the full functional scope of the latest Safety Designer.
To identify the different levels of the functionality, we use a 3-digit version number. The
version number is marked with the letter V on the device.
The functional scope of the device can be read at the following locations:
•
Label on the device
•
Display, entry in the menu Device information under Hardware
•
Safety Designer, Overview dialog box (only with connected devices)
•
Safety Designer, report
Table 24: Functional scope of LS-MS3-CO-IO-5M
Version number Amendments and new functions
1.0.0
•
F
irst released version
Revision
T
he different revision statuses of the devices are identified by “Rev” followed by a three-
digit version number. New devices have a label which indicates the revision status.
Table 25: Functional scope
Version number Amendments and new functions
1.2.0
•
F
irst released version
14.3 Data sheet
14.3.1 microScan3 Core I/O
Features
T
able 26: Features
LS-MS3-CO-IO-5M
Protective field range
Devices with a max. protec‐
t
ive field range of 5.5 m
≤ 5.5 m, details: see "Sensing range", page 149
Scanning range of the refer‐
ence contour field
Same as protective field range, see "Sensing range", page 149
Scanning range of the con‐
t
our detection field
Same as protective field range, see "Sensing range", page 149
Warning field range
14 TECHNICAL DATA
142
O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O 8025870/2020-09-04 | SICK
Subject to change without notice
To Next Page
Loading...
Need help?
General