SICK microScan3 Core I/O User Manual

10 Operation
10.1 Safety
DANGER
H
azard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
Maintenance work, alignment work, fault diagnoses, and any changes to the
integration of the protective device in the machine must only be carried out by
qualified personnel.
b
The effectiveness of the protective device must be checked following such work.
NOTE
T
his document does not provide instructions for operating the machine in which the
safety laser scanner is integrated.
10.2 Regular thorough check
The test is intended to ensure that the hazardous area is monitored by the protective
de
vice and that unprotected access to the hazardous area is prevented.
b
C
arry out the checks according to the instructions from the manufacturer of the
machine and from the operating entity.
10.3 LEDs


Figure 73: LEDs
1
Status LEDs
2
Additional LEDs for ON state and OFF state
4 status LEDs are located directly above the display.
1 2 3 4
Figure 74: Status LEDs
OPERATION 10
8025870/2020-09-04 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O
117
Subject to change without notice

SICK microScan3 Core I/O Specifications

General

Brand	SICK
Model	microScan3 Core I/O
Category	Scanner
Language	English