Figure 37: Recommended fitting height
Figure 38: Recommended fitting height for inverted mounting
4.3.10 Mobile protection in narrow aisles
Prerequisites
F
or use on industrial trucks in narrow aisles, the requirements according to the follow‐
ing documents must be met:
•
DIN 15185-2: Industrial trucks – Safety requirements - Part 2: Use in narrow
aisles
•
DGUV Regulation 68 (formerly: BGV D27): Work Safety Regulations for Industrial
Trucks (German Social Accident Insurance, DGUV)
•
VDMA Guideline: Floors for the use of narrow-aisle industrial trucks (VDMA, Sep‐
tember 2010)
•
Personal protection when using industrial trucks in narrow aisles (Berufsgenossen‐
schaft Handel und Warenlogistik (BGHW))
4 P
ROJECT PLANNING
52
O P E R A T I N G I N S T R U C T I O N S | microScan3 – PROFINET 8021219/1ELL/2022-01-21 | SICK
Subject to change without notice
To Next Page
Loading...
