SICK microScan3 User Manual

7.8 Application
Overview
Figure 65: Application
1
Basic settings for the application
2
Settings for the display
Application type
T
he type of application depends on the application of the safety laser scanner:
b
Select application type.
✓
Mobile
Mobile hazardous area protection is suitable for AGVs (automated guided vehi‐
c
les), cranes, and forklifts to protect people when vehicles are moving or docking.
The safety laser scanner monitors the area in the direction of travel and stops the
vehicle as soon as an object is located in the protective field.
✓
S
tationary
The position of the safety laser scanner is fixed. The safety laser scanner is
mount
ed horizontally (for hazardous area protection) or vertically (for hazardous
point protection and access protection).
Display language
T
he display of the safety laser scanner outputs notifications and states. Multiple lan‐
guages are available for the display.
b
Select a language that the operator understands.
✓
The safety laser scanner outputs the notifications in the set language.
7 C
ONFIGURATION
100
O P E R A T I N G I N S T R U C T I O N S | microScan3 – PROFINET 8021219/1ELL/2022-01-21 | SICK
Subject to change without notice

SICK microScan3 Specifications

General

Scanning angle	275°
Power supply	24 V DC
Supply voltage	24 V DC ± 20%
Enclosure rating	IP65
Resolution	70 mm
Protective field range	5.5 m
Number of fields	128
Interface	Ethernet
Safety integrity level	SIL3
Performance level	PL e
Ambient temperature	+50°C
Scanning range	5.5 m