SICK microScan3 User Manual

7.6 Identification
Overview
Figure 63: Identification
1
Parameters for the project and the device
In the Ident
ification dialog box, you can optionally enter names and information to
uniquely identify the application, project, and devices.
Device name
If a number of safety laser scanners are used in an application or in a project, a unique
device name helps to tell the individual devices apart.
19)
b
Give each device a unique device name.
Project name
T
he project name is used to identify an entire project. The same project name should
be chosen for all devices in the project.
b
Enter a project name.
Application name
T
he application name can be the same for a number of devices in the project. It
highlights that these devices realize an application together, by responding to one
another for example.
19)
The name used here is independent from PROFINET names.
CONFIGURATION 7
8021219/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – PROFINET
97
Subject to change without notice

SICK microScan3 Specifications

General

Brand	SICK
Model	microScan3
Category	Scanner
Language	English