SICK microScan3 User Manual

Display reference contour field
Y
ou determine whether the reference contour field is displayed.
Drawing surface
Y
ou can use a Cartesian or a polar coordinates system and select the colors for the grid
and the drawing area.
b
Select the Cartesian option.
✓
The coordinates system is shown as a Cartesian coordinates system.
b
Select the Polar option.
✓
The coordinates system is shown as a polar coordinates system.
b
Select Color of the grid.
✓
The field editor’s grid is displayed in the chosen color.
b
Select Color of the drawing surface.
✓
The field editor’s drawing area is displayed in the chosen color.
7.11.6 Editing fields using coordinates
You can use coordinates to edit fields. Depending on the form on which a field is
ba
sed, the appropriate input fields are displayed. The example shows a dialog box for a
rectangle.
CONFIGURATION 7
8021219/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – PROFINET
113
Subject to change without notice

SICK microScan3 Specifications

General

Scanning angle	275°
Power supply	24 V DC
Supply voltage	24 V DC ± 20%
Enclosure rating	IP65
Resolution	70 mm
Protective field range	5.5 m
Number of fields	128
Interface	Ethernet
Safety integrity level	SIL3
Performance level	PL e
Ambient temperature	+50°C
Scanning range	5.5 m