Siemens CU240B-2 - Page 136

Commissioning
5.3 Quick commissioning using the BOP-2 operator panel
Converter with the CU240B-2 and CU240E-2 Control Units
136 Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
8.9.
Motor cooling
SELF
Natural cooling
FORCED
Forced-air cooling
LIQUID
Liquid cooling
NO FAN
Without fan
9.
Select the application:
VEC STD
Constant load: Typical applications include belt conveyor
drives.
PUMP FAN
Speed
-dependent load: Typical applications include
pumps and fans.
10.
Select the default setting for the interfaces of the inverter that is suit
a-
ble for your application.
Default settings of the CU240B-2 interfaces (Page 97)
Default settings of the CU240E-2 interfaces (Page 104)
11.
Minimum and maximum motor speed
12.
13.
Motor ramp-up time
14.
Motor ramp-down time
15.
Ramp-down time for the OFF3 command