Siemens CU240B-2 - Page 320

Advanced commissioning
6.7 Application-specific functions
Converter with the CU240B-2 and CU240E-2 Control Units
320 Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Settings
Parameters
Description
p2181
Load monitoring response
Response when evaluating the load monitoring. Setting options
Table 6-46 Response options for load monitoring (Page 325)
p2182
Load monitoring speed threshold 1
p2183
Load monitoring speed threshold 2
p2184
Load monitoring speed threshold 3
p2185
Load monitoring torque threshold 1, upper
p2186
Load monitoring torque threshold 1, lower
p2187
Load monitoring torque threshold 2, upper
p2188
Load monitoring torque threshold 2, lower
p2189
Load monitoring torque threshold 3, upper
p2190
Load monitoring torque threshold 3, lower
p2192
Load monitoring delay time
Delay time for the message "Leave torque monitoring tolerance band"
p2193 = 1
Load monitoring configuration
(factory setting: 1)
Table 6-45 Setting options for load monitoring (Page 318)