Siemens CU240B-2 - Page 356

Backing up data and series commissioning
7.1 Backing up and transferring settings using a memory card
Converter with the CU240B-2 and CU240E-2 Control Units
356 Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Procedure with BOP-2
Proceed as follows to back up your settings on a memory card:
1.
If a USB cable is inserted in the inverter, withdraw it.
2.
Go to the "OPTIONS" menu.
3.
In the "OPTIONS" menu, select “TO
CARD”.
4.
Set the number of your data backup. Yo
u can back up 99 different
settings on the memory card.
5.
Start data transfer with OK.
6.
Wait until the inverter has backed up the settings to the memory card.
You have backed up the settings of the inverter on the memory card.