Configuring
6.6 Configuring the positioning axis/synchronous axis technology object
S7-1500 Motion Control V13 Update 3
128 Function Manual, 07/2014, A5E03879256-AC
●
Number of motor revolutions / number of load revolutions
The gear ratio of the load gear is specified as the ratio between motor revolutions and
load revolutions. Specify here an integral number of motor revolutions and the resulting
number of load revolutions.
Select the same values for the number of motor revolutions and load revolutions, if no
load gear is present.
Rotary - External Measuring System
An external measuring system provides the position values of the rotary load motion.
●
Number of motor revolutions / number of load revolutions
The gear ratio of the load gear is specified as the ratio between motor revolutions and
load revolutions. Specify here an integral number of motor revolutions and the resulting
number of load revolutions.
Select the same values for the number of motor revolutions and load revolutions, if no
load gear is present.
●
Distance per encoder revolution
● In this field, configure the distance recorded by the external measuring system per
encoder revolution.
To Next Page
Loading...
