Siemens SIMATIC S7-1500 Motion Control V13 - Override Tags (Positioning Axis;Synchronous Axis)

Appendix
A.2 Tags of the positioning axis/synchronous axis technology object
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
343
A.2.15
Override tags (positioning axis/synchronous axis)
The tag structure <TO>.Override.<tag name> contains the configuration for the override
parameters. The override parameters are used to apply a correction percentage to default
values. An override change takes effect immediately, and is performed with the dynamic
settings in effect in the Motion Control instruction.
Tags
Legend (Page 332)
Tag
Data type
Values
W
Description
Override.
STRUCT
Velocity LREAL 0.0 to 200.0% DIR Velocity or speed override
Percentage correction of the velocity/speed
See also
Evaluating the technology data block (Page 173)