Siemens SIMATIC S7-1500 Motion Control V13 - A.6.2.2 Stopmode 1

Appendix
A.6 MC_Power function chart
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
393
A.6.2.2
StopMode 1
Function chart: Enabling a technology object and disabling with "StopMode" = 1
①
The deceleration ramp depends on the configuration in the drive.
The behavior of the ready signal of the drive "DI DriveReadyInput" is manufacturer-specific.