Siemens SIMATIC S7-1500 Motion Control V13 - Technology Alarms 501-550

Appendix
A.4 Technology alarms
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
381
A.4.6
Technology alarms 501-550
Technology alarm 501
Alarm reaction: No reaction
Restart: Not required
Alarm text
Solution
Programmed velocity limited.
Check the value for the speed of the Motion Control
instruction.
Check the configuration of the dynamic limits.
Technology alarm 502
Alarm reaction: No reaction
Restart: Not required
Alarm text
Solution
Programmed acceleration/deceleration limited.
Acceleration Check the value for the acceleration of the Motion Con-
trol instruction.
Check the configuration of the dynamic limits.
Deceleration Check the value for the deceleration of the Motion Con-
trol instruction. Check the configuration of the dynamic
limits.
Technology alarm 503
Alarm reaction: No reaction
Restart: Not required
Alarm text
Solution
Programmed jerk limited.
Check the value for the jerk of the Motion Control in-
struction.
Check the configuration of the dynamic limits.