Siemens SIMATIC S7-1500 Motion Control V13 - Comparing Values

Configuring
6.8 Parameter view
S7-1500 Motion Control V13 Update 3
170 Function Manual, 07/2014, A5E03879256-AC
Bad modify values
● Modify values with process-related errors can be transmitted.
● Modify values with syntax errors
cannot
be transmitted.
6.8.4.9
Comparing values
You can use comparison functions to compare the following memory values of a parameter:
● Start value project
● Start value PLC
Requirements
● There is an online connection.
● The technology object is downloaded to the CPU.
● The Parameter view of the technology object is open.
Procedure
To compare the start values on the various target systems, follow these steps:
1. Click the "Selection of compare values" icon
.
A selection list containing the comparison options opens:
– Start value project - Start value PLC (default setting)
2. Select the desired comparison option.
The selected comparison option is executed as follows:
– A scales symbol appears in the header cells of the two columns selected for
comparison.
– Symbols are used in the "Compare result" column to indicate the result of the
comparison of the selected columns.