Siemens SIMATIC S7-1500 Motion Control V13 - 4 Guidelines; Guidelines on Use of Motion Control

S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
85
Guidelines
4
4.1
Guidelines on use of motion control
The guidelines described here present the basic procedure for using Motion Control with the
CPU S7-1500. These guidelines serve as recommendations.
Requirements
● A project with a CPU S7-1500 has been created.
Procedure
Proceed as follows to use Motion Control with the CPU S7-1500:
1. Add technology object (Page 99)
2. Working with the configuration editor (Page 100)
3. Programming (Page 172)
4. Downloading to CPU (Page 198)
5. Functional test in the Commissioning window (Page 199)
6. Diagnostics (Page 214)