Siemens SIMATIC S7-1500 Motion Control V13 - Tags

Basics
3.13 Mechanics
S7-1500 Motion Control V13 Update 3
38 Function Manual, 07/2014, A5E03879256-AC
3.13.2
Tags
The following technology object tags are relevant for the setting of the mechanics:
Type of motion
<TO>.Properties.MotionType Indication of linear or rotary motion
0: Linear motion
1: Rotary motion
Load gear
<TO>.LoadGear.Numerator
Load gear counter
<TO>.LoadGear.Denominator
Load gear denominator
Leadscrew pitch
<TO>.Mechanics.LeadScrew
Leadscrew pitch
Type of encoder mounting
<TO>.Sensor[n].MountingMode
Type of encoder mounting
<TO>.Sensor[n].Parameter.Distance
PerRevolution
Load distance per encoder revolution with an externally
mounted encoder
Inversion
<TO>.Actor.InverseDirection
Setpoint inversion
<TO>.Sensor[n].InverseDirection
Actual value inversion
Modulo
<TO>.Modulo.Enable
Enable modulo
<TO>.Modulo.Length Modulo length
<TO>.Modulo.StartValue
Modulo start value