Siemens SINAMICS G130 - Page 160

Commissioning
5.3 Procedure for commissioning via STARTER
Inverter chassis units
160 Operating Instructions, 07/2016, A5E00331449A
Web server
Figure 5-31 Web server
⇒
Configure the web server.
The web server is already active in the factory settings.
Activate and deactivate the web server under
Activate web server
.
Select
Only allow access via secure connection (https)
if necessary.
Note
Industrial Security
Observe the notes
on industrial security.
⇒
Click
Continue >