Siemens SINAMICS G130 - Speed Limitation

Setpoint channel and closed-loop control
7.2 Setpoint channel
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
323
Parameter
•
p1080
Minimum speed
•
p1091
Skip frequency speed 1
•
p1092
Skip frequency speed 2
•
p1093
Skip frequency speed 3
•
p1094
Skip frequency speed 4
•
p1098
Suppression speed scaling
•
r1099.0
Suppression bandwidth status word
•
p1101
Skip frequency speed bandwidth
•
p1106
Minimum speed signal source
•
r1112
Speed setpoint after minimum limiting
7.2.4
Speed limitation
Description
Speed limitation aims to limit the maximum permissible speed of the entire drive train to
protect the drive and load machine/process against damage caused by excessive speeds.
Signal flow diagram
Figure 7-2 Signal flow diagram: Speed limitation