Operation
6.8 Communication via PROFINET IO
Inverter chassis units
252 Operating Instructions, 07/2016, A5E00331449A
Activating online operation: STARTER via PROFINET IO
Description
Online operation with PROFINET IO is implemented using TCP/IP.
● STARTER Version 4.2 or higher
● Control unit CU320-2 PN or CBE20
STARTER via PROFINET IO (example)
Figure 6-27 STARTER via PROFINET (example)
Procedure, establishing online operation with PROFINET
1. Set the IP address in Windows XP
The PC/PG is referred here to a fixed, free IP address.
2. Settings in STARTER
3. Assigning the IP address and the name
The PROFINET interface must be "baptized" so that the STARTER can establish
communication.
4. Select online operation in STARTER.
To Next Page
Loading...
