Siemens SINAMICS G130 - Parameter

Functions, monitoring, and protective functions
9.4 Monitoring and protective functions
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
495
9.4.6.7
Parameter
•
p4100[0...11]
TM150 sensor type
•
r4101[0...11]
TM150 sensor resistance
•
p4102[0...23]
TM150 faul
t threshold/alarm threshold
•
p4103[0...11]
TM150 delay time
•
r4104.0...23
BO: TM150 temperature evaluation status
•
r4105[0...11]
CO: TM150 temperature actual value
•
p4108[0...5]
TM150 terminal block measurement method
•
p4109[0...11]
TM150 cable resistance
measurement
•
p4110[0...11]
TM150 cable resistance value
•
p4111[0...2]
TM150 group channel assignment
•
r4112[0...2]
CO: TM150 group, temperature actual value maximum value
•
r4113[0...2]
CO: TM150 group, temperature actual value minimum value
•
r4114[0...2]
C
O: TM150 group temperature actual value, average
•
p4117[0...2]
TM150 group, sensor fault effect
•
p4118[0...11]
TM150 fault threshold/alarm threshold hysteresis
•
p4119[0...11]
TM150 activate/deactivate smoothing
•
r4120
TM150 temperature filter time constant
•
p4121
TM150 filter, rated line frequency