Siemens SINAMICS G130 - Page 426

Functions, monitoring, and protective functions
9.2 Drive functions
Inverter chassis units
426 Operating Instructions, 07/2016, A5E00331449A
Features
● Connector inputs for the actual voltage sensing of the motor via VSM10 (p3661, r3662)
● Setting a phase difference (p3809)
● Can be activated by parameter (p3800)
● Enable via parameter (p3802)
Function diagram
FP 7020
Technology functions - Synchronizing
Parameter
•
p3800[0...n]
Sync network drive activation
•
p3801[0...n]
Sync
-line-drive drive object number
•
p3802[0...n]
BI: Sync network drive enable
•
r3803
CO/BO: Sync ne
twork drive control word
•
r3804
CO: Sync network drive target frequency
•
r3805
CO: Sync network drive frequency difference
•
p3806[0...n]
Sync network drive frequency difference threshold value
•
r3808
CO: Sync network drive phase difference
•
p3809[0...n]
Sy
nc network drive phase setpoint value
•
p3811[0...n]
Sync network drive frequency limitation
•
r3812
CO: Sync network drive correction frequency
•
p3813[0...n]
Sync network drive phase synchronism threshold value
•
r3814
CO: Sync network drive voltage differen
ce
•
p3815[0...n]
Sync network drive voltage difference threshold value
•
r3819.0...7
CO/BO: Sync network drive status word