Siemens SINAMICS G130 - Page 566

Technical specifications
12.3 Technical specifications
Inverter chassis units
566 Operating Instructions, 07/2016, A5E00331449A
Article number
6SL3310-
1GE33-8AAx
1GE35-0AAx
1GE36-1AAx
Recommended fuses
- Line protection
without semiconductor protection
Rated current
frame size to IEC 60269
- Line and semiconductor protection
6)
Rated current
Frame size to IEC 60269
A
A
3NA3260
400
3
3NE1334-2
450
2
3NA3372
630
3
3NE1436-2
630
3
3NA3475
800
4
3NE1438-2
800
3
Minimum short-circuit current
7)
A
4400
8000
10000
1)
Rated output of a typ. 6-pole standard induction motor based on I
L
or I
H
at 400 V 3 AC 50 Hz.
2)
Rated output of a typ. 6-pole standard induction motor based on I
L
or I
H
at 460 V 3 AC 60 Hz.
3)
The base-load current I
L
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s
(see "Overload capability").
4)
The base-load current I
H
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s
(see "Overload capability").
5)
If the auxiliary supply is to be fed in separately from the load supply, e.g., if the control should be able to continue com-
munication if the line voltage fails.
6)
It is mandatory that the specified fuses are used to achieve a UL-approved system.
7)
The minimum current required to reliably trigger 3NE1 protective devices.