Siemens SINAMICS G130 - Page 574

Technical specifications
12.3 Technical specifications
Inverter chassis units
574 Operating Instructions, 07/2016, A5E00331449A
Article number
6SL3310-
1GF35-8AAx
1GF37-4AAx
1GF38-1AAx
Recommended fuses
- Line protection
without semiconductor protection
Rated current
frame size to IEC 60269
- Line and semiconductor protection
6)
Rated current
Frame size to IEC 60269
A
A
3NA3354-6
2 x 355
3
3NE1447-2
670
3
3NA3365-6
2 x 500
3
3NE1448-2
850
3
3NA3365-6
2 x 500
3
3NE1434-2
2 x 500
2
Minimum short-circuit current
7)
A
8400
10500
10400
1)
Rated output of a typ. 6-pole standard induction motor based on I
L
or I
H
at 500 V 3 AC 50 Hz.
2)
Rated output of a typ. 6-pole standard induction motor based on I
L
or I
H
at 575 V 3 AC 60 Hz.
3)
The base-load current I
L
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s
(see "Overload capability").
4)
The base-load current I
H
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s
(see "Overload capability").
5)
If the auxiliary supply is to be fed in separately from the load supply, e.g., if the control should be able to continue com-
munication if the line voltage fails.
6)
It is mandatory that the specified fuses are used to achieve a UL-approved system.
7)
The minimum current required to reliably trigger 3NE1 protective devices.