Preface
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
7
EMC limit values for South Korea
The EMC limit values to be observed for Korea correspond to the limit values of the EMC
product standard for variable-speed electric drives EN 61800-3 of category C2 or the limit
value class A, Group 1 to EN 55011.
By implementing appropriate additional measures, the limit values according to category C2
or limit value class A, Group 1, are complied with. Furthermore, additional measures such as
the use of an additional radio interference suppression filter (EMC filter) may be required.
In addition, measures for proper plant design to meet EMC requirements are described in
detail in this manual and the "SINAMICS Low Voltage Configuration Manual".
The following certifications can be found on the Internet under the link SINAMICS G130
certificates (https://support.industry.siemens.com/cs/de/en/ps/13226/cert):
● EC declaration of conformity with reference to the EMC directive:
● EC declaration of conformity with reference to the machinery directive (safety)
● Manufacturers declaration in reference to Safety Integrated
To Next Page
Loading...
