Manual and Handwheel Travel (H1)
8.6 Data lists
Turning, Milling, Nibbling
156 Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Number Bit Name
V380x 1002 .0 to .2 Activated fixed-point approach in JOG (binary coded: fixed point 1 to
4)
V390x 0000 .7/.6 Position reached with coarse/fine exact stop
V390x 0004 .1, .0 Handwheel active (2, 1)
V390x 0004 .7 or .6 Traverse command plus or minus
V390x 0005 .0 to .6 Active machine function INC1 to continuous
V390x 1001 .0 to .2 Fixed-point approach in JOG active (binary coded)
V390x 1001 .3 to .5 Fixed point reached (binary coded)
To Next Page
Loading...
Need help?
General
