Siemens SINUMERIK 802D sl - Data Lists; Machine Data; Setting Data; Interface Signals

Compensation (K3)
11.5 Data lists
Turning, Milling, Nibbling
228 Function Manual, 11/2012, 6FC5397-1CP10-5BA0
11.5 Data lists
11.5.1 Machine data
Number Identifier Name
Axis-specific
32450 BACKLASH[0] Backlash
32630 FFW_ACTIVATION_MODE Feedforward control can be activated from the
program
32700 ENC_COMP_ENABLE[0] Interpolatory compensation active
32710 CEC_ENABLE Sag compensation enable
32711 CEC_SCALING_SYSTEM_METRIC Scaling system for sag compensation
32720 CEC_MAX_SUM Maximum compensation value for sag
compensation
32730 CEC_MAX_VELO Change in velocity with CEC
32810 EQUIV_SPEEDCTRL_TIME[0]...[5] Equivalent time constant of the speed control
loop
36500 ENC_CHANGE_TOL Backlash compensation partial section
38000 MM_ENC_COMP_MAX_POINTS[0] Interpolation points for encoder/spindle
compensation (LEC ) (for display only)
11.5.2 Setting data
Number Identifier Name
General
41300 CEC_TABLE_ENABLE Compensation table enable
11.5.3 Interface signals
Number Bit Name
Axis/spindle-specific
V390x 0000 .4 Referenced/synchronized 1