Siemens SINUMERIK 802D sl - Data Lists; Machine Data; Interface Signals

Indexing Axes (T1)
21.7 Data lists
Turning, Milling, Nibbling
380 Function Manual, 11/2012, 6FC5397-1CP10-5BA0
21.7 Data lists
21.7.1 Machine data
Number Identifier Name
General
10900 INDEX_AX_LENGTH_POS_TAB_1 Number of positions for indexing axis table 1
10910 INDEX_AX_POS_TAB_1[n] Indexing position table 1
10920 INDEX_AX_LENGTH_POS_TAB_2 Number of positions for indexing axis table 2
10930 INDEX_AX_POS_TAB_2[n] Indexing position table 2
Axis/spindle-specific
30300 IS_ROT_AX Rotary axis
30310 ROT_IS_MODULO Modulo conversion for rotary axis
30320 DISPLAY_IS_MODULO Position display is modulo 360°
30500 INDEX_AX_ASSIGN_POS_TAB Axis is indexing axis
21.7.2 Interface signals
Number Bit Name
Axis-specific
V390x 0000 .4 Referenced/synchronized 1
V390x 1002 .6 Indexing axis in position