Siemens SINUMERIK 802D sl - Page 165

Auxiliary Function Outputs to PLC (H2)
9.7 Data lists
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
165
Number Bit Name
VD2500 3024 M function 4 (DINT)
VB2500 3028 Extended address of M function 4 (BYTE)
VD2500 3032 M function 5 (DINT)
VB2500 3036 Extended address of M function 5 (BYTE)
VD2500 4000 S function 1 (REAL format)
VB2500 4004 Extended address of S function 1 (BYTE)
VD2500 4008 S function 2 (REAL format)
VB2500 4012 Extended address of S function 2 (BYTE)
VD2500 5000 D function 1 (DINT)
VW2500 6004 Extended address of H function 1 (Word)
VD2500 6000 H function 1 (REAL format)
VW2500 6012 Extended address of H function 2 (Word)
VD2500 6008 H function 2 (REAL format)
VW2500 6020 Extended address of H function 3 (Word)
VD2500 6016 H function 3 (REAL format)
V2500 1000 .0 - .7 Decoded M signals: M00 - M07
V2500 1001 .0 - .7 Decoded M signals: M08 - M15
to
V2500 1012 .0 - .7 Decoded M signals: M96 - M99
VD370x 0000 - M function for the spindle (DINT), axis-specific
VD370x 0004 - S function for the spindle (REAL), axis-specific