Preface
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
7
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at:
http://support.automation.siemens.com
Here, enter the number 15257461 as the search term or contact your local Siemens office.
Technical information
Notations
The following notation and abbreviations are used in this documentation:
● PLC interface signals -> IS "Signal name" (signal data)
Example: IS "Feedrate override" (VB380x 0000)
The variable byte is located in the "to axis" range, x stands for the axis:
0 Axis 1
1 Axis 2
n Axis n+1.
● Machine data -> MD MD_NR MD_NAME (description)
e.g.: MD30300 IS_ROT_AX (rotary axis)
● Setting data -> SD SD_NR SD_NAME (description)
e.g.: SD41200 JOG_SPIND_SET_VELO (JOG velocity for the spindle)
● The chapter titles are supplemented by a code in brackets (e.g. Chapter 1: EMERGENCY
STOP (N2)). This brief description is used in cross references to other chapters.
The machine and setting data are divided into the following areas:
Range Data area Meaning
200 - 399 $MM_ Display machine data
10,000 - 18,999 $MN_ General machine data
20,000 - 28,999 $MC_ Channelspecific machine data
30,000 - 38,999 $MA_ Axis-specific machine data
41,000 - 41,999 $SN_ General setting data
42,000 - 42,999 $SC_ Channel-specific setting data
43,000 - 43,999 $SA_ Axis-specific setting data
To Next Page
Loading...
Need help?
General
