EasyManua.ls Logo

Siemens SIPROTEC 4 - Page 444

Siemens SIPROTEC 4
734 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Profibus FO (FMS and DP)
FO connector type ST connector
Single ring / double ring according to the order for FMS; for DP only
double ring available
Connection for flush-mounted
casing
Rear panel, mounting location “B”
Connection for surface-mounted
casing
in console housing on the case bottom via RS485 and external RS485/
optical converter
Transmission Speed up to 1.5 MBd
recommended: > 500 kBd with normal casing
≤ 57 600 Bd at detached operator panel
Optical Wavelength λ = 820 nm
Laser Class 1 according to EN
60825-1/-2
using glass fiber 50/125 μm or using glass fiber 62.5/125 μm
Permissible Optical Link Signal
Attenuation
max. 8 dB, with glass fiber 62.5/125 μm
Maximum Distance of Transmission max. 0.93 miles (1.5 km)
DNP3.0 / MODBUS RS485
Connection for flush-mounted
casing
Rear panel, mounting location “B”, 9-pin DSUB miniature connector
Connection for surface-mounted
casing
at the housing mounted case on the case bottom
Test Voltage (PELV) AC 500 V; 50 Hz
Transmission Speed up to 19,200 Bd
Maximum Distance of Transmission max. 0.62 miles (1 km)
DNP3.0 / MODBUS / FO
FO connector type ST–Connector Receiver/Transmitter
Connection for flush-mounted
casing
Rear panel, mounting location “B”
Connection for surface-mounted
casing
not available
Transmission Speed up to 19,200 Bd
Optical Wavelength λ = 820 nm
Laser Class 1 according to EN
60825-1/-2
using glass fiber 50/125 μm or using glass fiber 62.5/125 μm
Permissible Optical Link Signal
Attenuation
max. 8 dB, with glass fiber 62.5/125 μm
Maximum Distance of Transmission max. 0.93 miles (1.5 km)
Ethernet electrical (EN100) for DIGSI, IEC61850, DNP3 TCP, PROFINET
Connection for flush-mounted
casing
rear panel, mounting location “B”; 2 x RJ45 socket contact 100BaseT acc.
to IEEE802.3
Connection for surface-mounted
casing
in console housing at case bottom
Test voltage (reg. socket) (PELV) 500 V; 50 Hz
Transmission speed 100 MBit/s
Bridgeable distance 65.62 feet (20 m)
Technical Data
4.1 General Device Data
444 SIPROTEC 4, 7SJ62/64, Manual
C53000-G1140-C207-8, Edition 08.2016

Table of Contents

Other manuals for Siemens SIPROTEC 4

Related product manuals