Default Settings and Protocol-dependent Functions
When the device leaves the factory, a large number of LED indications, binary inputs and outputs as well as
function keys are already preset. They are summarized in the following table.
E.1 LEDs 600
E.2 Binary Input 601
E.3 Binary Output 602
E.4 Function Keys 603
E.5 Default Display 604
E.6 Pre-defined CFC Charts 608
E.7 Protocol-dependent Functions 611
E
SIPROTEC 4, 7SJ62/64, Manual 599
C53000-G1140-C207-8, Edition 08.2016
To Next Page
Loading...
