Function Significant Feature
8 Channels
16 Channels
24 Channels
32 Channels
40 Channels
Power trigger 1 2 5 7 9
Recorder routing VI 2 4 6 8 10
Recorder routing V 2 4 6 8 10
PQ 10/12cyc 2 4 6 8 10
PQ trend 2 4 6 8 10
PQ flicker 2 4 6 8 10
Measuring inputs,1-phase voltage 2 4 6 8 10
Measuring inputs, 3-phase voltage 2 4 6 8 10
Measuring inputs, 1-phase current 2 4 6 8 10
Measuring inputs, 3-phase current 2 4 6 8 10
Binary input 1 1 1 1 1
Binary output 1 1 1 1 1
Communication channel 9 9 9 9 9
Process monitor 9 9 9 9 9
Function key 1 1 1 1 1
GOOSE input 1 1 1 1 1
LED, multicolor 1 1 1 1 1
Measuring transducers 5 5 5 5 5
Measuring transducers, fast 5 3 5 5 5
CFC standard 1 1 1 1 1
CFC arithmetic 1 1 1 1 1
CFC logic 1 1 1 1 1
CFC timer 1 1 1 1 1
CFC switching sequences 1 1 1 1 1
NOTE
A maximum of 40 sampled-value channels (SAV) are supported in the 7KE85 fault recorder, depending on
the significant feature selected. If you configure more than 40 channels, the message The number of
configured sampled-value channels (SAV) exceeds the maximum allowed appears in DIGSI 5.
If more than 40 sampled-value channels (SAV) are physically present in the device (for example, 6x IO202),
the device enters Fallback mode even if only 40 or fewer channels are configured.
A description of the function-point principle is provided in chapter 2.2 Adjustment of Application Templates/
Functional Scope.
The following tables show the default settings of the signals in the application templates for the fast-scan and
slow-scan recorders:
Table 4-3
Default Settings of the User-Defined Signals in the Fast-Scan Recorder
Signal Routed in the Tab Routed as
UserSPS Binary input 1 H (active without voltage)
>Manual start
Function key 1 P (trigger pulse)
Recording started
LED 1 U (unbuffered)
Record made
LED 2 U (unbuffered)
Applications
4.2 Application Template and Functional Scope for the Fault Recorder
SIPROTEC 5, Fault Recorder, Manual 107
C53000-G5040-C018-5, Edition 11.2017
To Next Page
Loading...
