Siemens SIRIUS 3RK3 - Page 283

Diagnostics / service
8.5 Diagnostics with data sets
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
281
DS92 (device messages)
Byte Message bit Error
category
DP error
no.
Comments
23
1
Invalid parameter value SF F24, F16 A parameter in the configuration contains
an invalid value.
23
2
Reserved=0
23
3
Reserved=0
23
4
Reserved=0
23
5
Factory settings restored The device contains the factory settings.
23
6
Reserved=0
23
7
Reserved=0
24...25 Reserved=0
26
0
Memory module not plugged in SF F24, F26 A memory module has not been plugged
in.
26
1
Memory module defective SF F24, F27 The memory module is defective
26
2
Reserved=0
26
3
Programming successful The configuration data was successfully
saved in the memory module.
26
4
Programming error SF F24, F27 The configuration data could not be
saved in the memory module.
26
5
Memory module too small SF F24, F7 The volume of configuration data is too
large for the memory module.
26
6
Memory module incorrectly
organized
The memory module is not compatible
with the device.
26
7
Memory module deleted The configuration data has been deleted
27
0
Reset implemented Reset
27
1
Reset was not possible
27
2
Reserved=0
27
3
Reserved=0
27
4
Reserved=0
27
5
Reserved=0
27
6
Reserved=0
27
7
Reserved=0
28
0
Reserved=0
28
1
Reserved=0
28
2
Reserved=0
28
3
Reserved=0
28
4
Reserved=0
28
5
Reserved=0
28
6
Reserved=0
28
7
Reserved=0
29
0
Reserved=0
29
1
Reserved=0
29
2
Reserved=0
29
3
Reserved=0