Siemens SIRIUS M200D - Page 131

Configuration / parameterization
5.2 Parameterize
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
131
Device parameter
Default setting
Setting range
Output 1 action Control source PIO DO 1.1
Connector monitoring Deactivated
• Deactivated
• Line side
Response when
connector removed
Group fault
• Group fault
• Group fault only after ON command
• Group warning
Short-circuit protection (Page 64)
Response to circuit
breaker OFF
Group fault
• Group fault
• Group fault only after ON command
• Group warning
Maintenance (Page 65)
Maintenance timer -
warning limit_1
946.080.000
(30 years)
0 to 4,294,967,295 s
Increment: 1 s
Maintenance timer -
warning limit_2
946.080.000
(30 years)
0 to 4,294,967,295 s
Increment: 1 s
1)
On soft starters (sDSSte, sRSSte) in the startup mode "direct"