Siemens SIRIUS M200D - Page 203

Appendix
A.1 Data formats and data sets
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
203
Object
No.
Byte.Bit
Encoding
Meaning
Relevant for
DSte / RSte
sDSSte/sRSSte
1409 15.2 Bit (1 = active) Phase failure L1 --- All
1410 15.3 Phase failure L2 --- All
1411 15.4 Phase failure L3 --- All
1412 15.5 Rotational direction of line frequency right --- All
1413 15.6 Rotational direction of line frequency left --- All
1435 17.0 Bit (1 = active) Output 1 active All All
1436 17.1 Output 2 active All All
1469 18.0 Bit (1 = active) Output BO active All with BO All with BO
18.4 Output 1 overloaded All All
18.5 Output 2 overloaded All All
Switch / Control
1470 19.1 Bit (1 = active) Ready for motor ON All All
1414 19.2 Switching element short-circuited All All
Protection function (motor, cable, short-circuit)
1422 20.0 Bit (1 = active) Thermal motor model deactivated All All
Communication
357 22.0 Bit (1 = active) Automatic mode
(redundant to bit 7.2)
All All
358 22.1 Manual bus mode
(redundant to bit 7.3)
All All
1443 22.2 Manual bus - PC controls All All
359 22.3 Manual local mode
(redundant to bit 7.4)
All All
1444 22.4 Manual local - input controls All All
1445 22.5 Manual local - HMI controls All All
1446 22.6 Manual local - PC controls All All
Prewarnings
1401 24.0 Bit (1 = active) Group prewarning All All
1419 24.2 Prewarning limit - remaining time for tripping
undershot
All All
1420 24.3 Prewarning limit - motor heating exceeded All All
Maintenance
1457 26.0 Bit (1 = active) Maintenance required All All
1458 26.1 Maintenance requested All All
1460 27.0 Bit (1 = active) Maintenance timer limit_1 exceeded All All
1461 27.1 Maintenance timer limit_2 exceeded All All
1485 29.0 Bit (1 = active) Connector monitoring deactivated All All
1486 29.1 Bit (1 = active) Connector disconnected on line side All All