Siemens SITRANS LUT400 - Page 315

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
313
2.8.8 FAIL-SAFE FAULT ALARM
2.8.8.1 ENABLE
2.8.8.2 ASSIGNED RELAY
2.8.8.3 ALARM STATE
2.8.9 HIGH FLOWRATE ALARM (LUT440 only)
2.8.9.1 ENABLE
2.8.9.2 HIGH FLOWRATE VALUE ON
2.8.9.3 HIGH FLOWRATE VALUE OFF
2.8.9.4 ASSIGNED RELAY
2.8.9.5 ALARM STATE
2.8.10 LOW FLOWRATE ALARM (LUT440 only)
2.8.10.1 ENABLE
2.8.10.2 LOW FLOWRATE VALUE ON
2.8.10.3 LOW FLOWRATE VALUE OFF
2.8.10.4 ASSIGNED RELAY
2.8.10.5 ALARM STATE
2.8.11 RELAY LOGIC
2.8.11.1 RELAY 1 LOGIC
2.8.11.2 RELAY 2 LOGIC
2.8.11.3 RELAY 3 LOGIC
2.8.12 TIME TO SPILL
2.8.12.1 LEVEL TO SPILL
2.8.12.2 MINUTES LEFT TO SPILL
2.9 DISCRETE INPUTS
2.9.1 BACKUP LEVEL OVERRIDE
2.9.1.1 ENABLE
2.9.1.2 LEVEL OVERRIDE VALUE
2.9.1.3 DISCRETE INPUT NUMBER
2.9.2 DISCRETE INPUT LOGIC
2.9.2.1 DISCRETE INPUT 1 LOGIC
2.9.2.2 DISCRETE INPUT 1 SCALED STATE
2.9.2.3 DISCRETE INPUT 2 LOGIC
2.9.2.4 DISCRETE INPUT 2 SCALED STATE
2.9.3 PUMP INTERLOCK (LUT430, 440 only)
2.9.3.1 ENABLE PUMP 1
2.9.3.2 PUMP 1 DISCRETE INPUT
2.9.3.3 ENABLE PUMP 2
2.9.3.4 PUMP 2 DISCRETE INPUT
2.10 DATA LOGGING
2.10.1 LOGGING MODE
2.10.2 PROCESS VALUE LOG