Simplex 4100U Installation & Maintenance

F-3
Brooks Range - Conventional Detectors
PFS-A Heat detector Type A
PFS-B Heat detector Type B
PFS-C Heat detector Type C
PFS-D Heat detector Type D
PFS-P Photoelectric smoke detector
PFS-P MK II Photoelectric smoke detector
PFS-I Ionisation smoke detector
PFS-I MK II Ionisation smoke detector
Cerberus Range - Conventional Detectors
D01191A Beam
DL01191A Beam
The following range of detectors may be used with MAPNET Modules.
Simplex Range - Analog Addressable Sensors
4098-9701 High / Very High sensitivity Photoelectric smoke
4098-9716 Ionisation smoke
4098-9731 Type A / Type B Heat
4098-9781 Addressable LED Indicating base
4098-9782 Addressable LED Indicating base with Sounder
4098-9783 Addressable LED Indicating base with Relay
driver
4098-9714/9714EA TrueAlarm Photoelectric smoke
4098-9717/9717EA TrueAlarm Ionization smoke
4098-9733/9733EA TrueAlarm Type A / Type B Heat
4098-9754/9754EA TrueAlarm Multi-Sensor Photo / Type A / Type B
Heat
4098-9789/9789EA TrueAlarm Addressable LED Indicating base
4098-9794/9794EA TrueAlarm Addressable LED Indicating base
with Sounder
4098-9795/9795EA TrueAlarm Addressable Multi-Sensor LED
Indicating base with Sounder
4098-9796/9796EA TrueAlarm Addressable Multi-Sensor LED
Indicating base
4098-9752/9752EA TrueAlarm Addressable Photoelectric Duct
Probe
4098-9755/9755EA TrueAlarm Addressable Photoelectric Duct
Probe
Continued on next page
List of Approved Devices, Continued

Simplex 4100U Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Max Signaling Line Circuits (SLC)	2
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	10% to 93% non-condensing
Network Capability	Yes
Communication Protocol	RS-232, RS-485
Battery Backup	24 VDC
NAC Outputs	4
Signaling Line Circuits (SLCs)	2
Power Supply Current	3.0 A
Max Notification Appliance Circuits (NAC)	4
Max Releasing Circuits	4
Max Relay Circuits	4
Communication Ports	RS-232, RS-485