WSM6 Manual
Document Ref: UM-8270-000
Issue: A Rev 0
Section 7
October 2011 83
7.9.5 Diagnostics – Reset Transponder
This feature allows the unit to be put into a fixed, known state, ready for testing. The Nav Scheme
will be HPR-300 and the channel B01. The address is not changed.
Figure 7-44 – Write HPR Channel
Figure 7-45 – HPR Channel written
7.9.6 About
From the Main Menu, select About to display the software version:
Figure 7-46 – Sonardyne About screen
Press Products Supported to view which types of Transponder the software supports:
To Next Page
Loading...
