4.
Populate the following fields as needed:
Host—Enter either the hostname or IP address of the RADIUS server on the net
work with which you wish SecureSync to authenticate.
Port—Defines the RADIUS Port to use. The default RADIUS Port is 1812, but this
can be changed, as required.
Secret key—Enter the secret key which is shared by SecureSync and the RADIUS
server (the key is used to generate an MD5 hash).
Timeout—Defines the Timeout that SecureSync will wait to communicate with the
RADIUS server.
5.
Click the Add Server button.
Viewing the Status of a RADIUS Server
To view the status of a RADIUS server:
1.
Navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel, click the RADIUS Setup button.
3.
The Radius Setup window will display.
244
CHAPTER 4 • SecureSync User Reference Guide Rev. 23
4.3 Managing Users and Security
To Next Page
Loading...