Black plate (103,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
& Warning chimes and warning
light
S02AP06
The keyless access function sounds a
warning chime and flashes the access key
warning light on the combination meter in
order to minimize improper operations and
help protect your vehicle from theft.
When the warning chime sounds and/or
the warning light flashes, take the appro-
priate action. For details, refer to “
s03ae55-
Warning chimes and warning light of
keyless a ccess with push-button start
system” F3-25.
NOTE
For China models, the outside warning
chime will not sound.
& Disabling keyless access
function
S02AP07
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the
keyless access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. The setting can also be changed at
SUBARU dealers. For more details, we
recommend that you contact a
SUBARU dealer.
. To start the engine while the func-
tions are disabled, perform the proce-
dure described in “
s09ap03Starting engine”
F9-16.
! Disabling functions
S02AP0701
1. Sit in the driver’s seat, and close the
door.
1) Lock
2) Unlock
2. Push the unlock side of the power door
locking switch.
3. Within 5 seconds a fter step 2 is
performed, open the driver’s door.
4. Within 5 seconds a fter step 3 is
performed, push the unlock side of the
power door locking switch twice while the
door is open.
5. Within 30 seconds aft er step 4 is
performed, close and open the driver’s
door twice.
6. Within 30 seconds aft er step 5 is
performed, push the unlock side of the
power door locking switch twice while the
door is open.
7. Within 30 seconds aft er step 6 is
performed, close and open the driver’s
door once.
8. Within 5 seconds after step 7 is
performed, close the door. A chirp sound
will be heard twice, and the functions are
disabled.
NOTE
In steps 4 and 6, push the power door
locking switch slowly. If the switch is
pushed quickly, the functions may not
be disabled.
! Enabling functions
S02AP0702
Perform the procedure to disable the
functions again. A chirp sound will be
heard once, and the functions are en-
abled.
Keys and doors 2-15
– CONTINUED –
2
To Next Page
Loading...
