EasyManua.ls Logo

Subaru FORESTER 2012 - Cooling System; Cooling Fan, Hose and Connections

Subaru FORESTER 2012
445 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (370,1)
Model "A8170GE-A" EDITED: 2011/ 7/ 3
11-20 Maintenance and service
Maintenance schedule F11-3.
NOTE
Synthetic oil of the grade and viscosity
noted in chapter 12 is the recom-
mended engine oil for optimum engine
performance. Conventional oil may be
used with no detriment to engine dur-
ability or driveability.
Cooling system
S11AF
WARNING
Never attempt to remove the radia-
tor cap until the engine has been
shut off and has cooled down
completely. Since the coolant is
under pressure, you may suffer
serious burns from a spray of boil-
ing hot coolant when the cap is
removed.
CAUTION
. The cool ing sy stem ha s bee n
filled at the factory with a high
quality, corrosion-inhibiting,
year-round coolant which pro-
vides protection against freezing
down to 368C(338F). Make
sure to always use genuine
SUBARU Super Coolant or an
equivalent (non-amine type cool-
ant).
. If the coolant requires water dilu-
tion, be sure to use soft water (or
clear and drinkable water) and to
follow the required dilution ratio.
. Mixing with a different coolant
and/or hard water may result in
problems including, but not lim-
ited to, shortened engine compo-
nent life, cooling system clog-
ging, coolant leaks and engine
damage from overheating. There-
fore, never mix different kinds of
coolant and/or hard water even if
freezing temperatures are not
expected.
. Do not splash the engine coolant
over painted parts. The alcohol
contained in the engine coolant
may damage the paint surface.
& Cooling fan, hose and con-
nections
S11AF03
Your vehicle employs an electric cooling
fan which is thermostatically controlled to
operate when the engine coolant reaches
a specific temperature.
If the radiator cooling fan does not operate
even when the following conditions occur,
the cooling fan circuit may be defective.
. The engine coolant temperature gauge
exceeds the normal operating range (if
equipped). Refer to
s03ad08Temperature
gauge F3-13.
. The coolant temperature high warning
light blinks or illuminates in RED (if

Table of Contents

Other manuals for Subaru FORESTER 2012

Related product manuals