Black plate (96,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
2-8 Keys and doors
Keyless access with push-
button start system (if
equipped)
S02AP
1) Access key (main)
2) Access key (sub)
3) Key number plate
4) Security ID plate
The vehicle has two access keys, a key
number plate and a security ID plate.
Keyless access with push-button start
system allows the following functions by
carrying the access key.
. Locking and unlocking of the doors and
rear gate
. Starting and stopping the engine
Locking and unlocking by the remote
keyless entry system can also be con-
trolled with the buttons on the access key.
For the engine starting procedure, refer to
“
s07beStarting and stopping engine (models
with push-button start system)” F7-8.
For Europe:
. This device complies with the essential
requirements of the Radio and Telecom-
munications Terminal Equipment Directive
1999/5/EC. A copy of the original Declara-
tion of Conformity and the CE marking are
found in chapter 13.
. Hereby, DENSO CORPORATION de-
clares that this 14ACA/13BZZ is in com-
pliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC.
& Safety precautions
S02AP11
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, stay at
least 22 cm (8.7 in) away from the
transmitting antennas installed on
the vehicle.
The radio waves from the transmit-
ting antennas on the vehicle could
adversely affect the operation of
implanted pacemakers and im-
planted defibrillators.
If you wear electric medical equip-
ment other than an implanted pace-
maker or an implanted defibrillator,
before using the keyless access
function, refer to “Radio waves used
for the keyless access with push-
button start system” mentioned la-
ter, and contact the electric medical
equipment manufacturer for more
information. The radio waves from
the transmitting antennas on the
vehicle could adversely affect the
operation of the electric medical
equipment.
. The operational/non-operational
setting for the keyless access
function can be changed. For
the setting procedure, refer to
“
s02ap07Disabling keyless access
function” F2-15. The setting can
also be changed by a SUBARU
dealer. For more details, we re-
commend that you contact a
SUBARU dealer.
. For detailed information about
the operation method for the
push-button ignition switch while
the keyless access functions is
switched to the non-operational
mode, refer to “
s09apAccess key – if
access key does not operate
To Next Page
Loading...
