EasyManua.ls Logo

Subaru FORESTER 2012 - Ignition Switch Light; Push-Button Ignition Switch (Models with Push-Button Start System); Safety Precautions; Operating Range for Push-Button Start System

Subaru FORESTER 2012
445 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (123,1)
Model "A8170GE-A" EDITED: 2011/ 7/ 3
& Ignition switch light
S03AA06
For easy access to the ignition switch in
the dark, the ignition switch light illumi-
nates when the drivers door is opened or
when the drivers door is unlocked using
the remote keyless entry transmitter.
The light remains illuminated for several
tens of seconds and then gradually turns
off under the following conditions.
. When the drivers door is closed
. When the doors are unlocked using the
remote keyless entry transmitter
The light turns off immediately under the
following conditions.
. When the ignition switch is turned to
the ON position
. When all doors and the rear gate are
locked using the remote keyless entry
transmitter
Push-button ignition switch
(models with push-button
start system)
S03BG
& Safety precautions
S03AG04
Refer to s02ap11Safety precautions F2-8.
& Operating range for push-
button start system
S03BG01
1) Antenna
2) Operating range
NOTE
. If the access key is not detected
within the operating range of the an-
tennas inside the vehicle, the power
switch and the engine start cannot be
operated.
. Even when the access key is outside
the vehicle, if it is placed too close to
the glass, the power may switch on.
. Do not leave the access key in the
following places. It may become im-
possible to operate the power switch.
On the instrument panel
On the floor
Inside the glove box
Inside the door trim pocket
On the rear seat
At the corner of the cargo area
. When operating the push-button
ignition switch or starting the engine,
if the battery of the access key is
discharged, perform t he procedure
described in
s09apAccess key if access
key does not operate properly F9-15.
In such a case, replace the battery
immediately. Refer to
s11bk01Replacing
battery of access key F11-61.
Instruments and controls 3-5
CONTINUED
3

Table of Contents

Other manuals for Subaru FORESTER 2012

Related product manuals