Subaru FORESTER 2012 - Replacing Battery of Access Key

Black plate (411,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
. Batteries shall not be exposed to
excessive heat such as sun-
shine, fire or the like.
NOTE
. Replace only with the same or
equivalent type of battery recom-
mended by the manufacturer.
. Dispose of used batteries according
to the local laws.
. Mount the battery in the correct
orientation to prevent fluid leakage.
Be careful not to bend the terminals. It
may result in a malfunction.
. It is recommended that the battery
should be replaced at a SUBARU deal-
er.
. Use a new battery.
. After replacing the battery, confirm
that the access key/transmitter func-
tions properly.
& Replacing battery of access
key
S11BK01
Battery: Button battery CR1632
1) Knob
2) Mechanical key
1. Take out the mechanical key.
2. Wrap a flat-head screwdriver with vinyl
tape or a cloth, and insert it in the gap (A)
to remove the cover.
3. Remove the board (B) in the cover.
Place it w ith the battery side facing
upward.
Maintenance and service 11-61
– CONTINUED –
11