Black plate (128,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
3-10 Instruments and controls
& Odometer/Trip meter
S03AD09
Type A, B and C combination meter
1) Trip knob (left-hand drive models)
2) Trip knob (right-hand drive models)
Type D and E combination meter
1) Trip knob
This meter displays the odometer and two
trip meters when the ignition switch is in
the “ON” position.
If you press the trip knob when the ignition
switch is in the “LOCK”/“OFF” position, the
odometer/trip meter will light up. It is
possible to switch the indications while
the odometer/trip meter is lit up. If you do
not press the trip knob within 10 seconds
of illumination of the odometer/trip meter,
the odometer/trip meter will turn off.
The display can be switched as shown in
the following sequence by pressing the
trip knob.
Type A, B and C combination meter:
*: “ ” or “ ”, and “ ” or “ ” cannot
be displayed when the ignition switch is
in the “ON” position.
Type D and E combination meter:
*: “ ” or “ ” cannot be displayed when
the ignition switch is in the “ON” posi-
tion.
! Odometer
S03AD0901
Type A, B and C combination meter