Black plate (409,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
& License plate light
S11BE07
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the lens and cover.
6. Tighten the mounting screws.
& Dome light, map light, cargo
area light and door step light
S11BE37
CAUTION
When the door or the rear gate is
opened, the lights may illuminate
and the bulbs may become very hot.
Observe the following precautions
in order to avoid burning yourself.
. When replacing the bulb of the
door step light, always wear
gloves.
. When replacing the other bulb,
close the door and the rear gate,
and wait until the bulb becomes
cool enough.
Dome light (type A)
Dome light (type B)
Map light
Maintenance and service
11-59
– CONTINUED –
11
To Next Page
Loading...
