EasyManua.ls Logo

Subaru FORESTER 2012 - Recommended Grade and Viscosity

Subaru FORESTER 2012
445 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (379,1)
Model "A8170GE-A" EDITED: 2011/ 7/ 3
5-speed transmission (turbo models)
Check the oil level monthly.
1. Park the vehicle on a level surface and
stop the engine.
2. Pull out the level gauge, wipe it clean,
and insert it again.
1) Full level
2) Low level
3. Pull out the level gauge again and
check the oil level on it. If it is below the
low level, add oil through the level gauge
hole to bring the level up to the full level.
CAUTION
Be careful not to spill manual trans-
mission oil when adding it. If oil
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or a
fire. If oil gets on the exhaust pipe,
be sure to wipe it off.
& Recommended grade and
viscosity
S11AJ02
Each oil manufacturer has its own base
oils and additives. Never use different
brands t ogether. For details, refer to
s12aa13Manual transmission, front differential
and rear differential gear oil F12-10.
Maintenance and service 11-29
11

Table of Contents

Other manuals for Subaru FORESTER 2012

Related product manuals